News
Stop Wrestling with 380V! This 220V Plug-and-Play 3kW UV Lamp Is the Real "All-Rounder" for Lab Liquid Processing.
For anyone who's worked in a lab, you know that when it comes to photocatalytic reactions—especially large-flow liquid processing—the biggest headache isn't the reaction conditions. It's the **power supply**.
Many older university buildings or startup incubators simply don't have 380V three-phase outlets. Want to run high-power UV for degradation or synthesis? You stare at that bulky industrial power supply, then at the standard wall socket, and just shake your head. Your only options: scale down your experiment, or pay a fortune to get a dedicated line installed.
Recently, I got my hands on a clever kit that completely solves this "have or have-not" problem.
**1. 220V Grit, Say Goodbye to "Power Anxiety"**
This vertical liquid treatment lamp (model **220V3kwUV**) does one slick thing—it runs directly on **standard 220V mains**. One power supply drives one lamp, and you can **soft-switch between 2kW and 3kW**. What does that mean? It means you can simulate industrial-grade UV intensity right in your ordinary lab, without waiting in line to beg the maintenance crew for a power hookup.
**2. Dual-Wavelength "Mastery" for Serious Research**
If you work with UV curing or photocatalysis, you know that **253.7nm** and **365nm** are the two golden lines. 253.7nm handles strong decomposition (breaking chemical bonds, sterilization), while 365nm handles photoexcitation (triggering free-radical reactions). This lamp uses **high-purity quartz tubes and sleeves**, which means minimal transmission loss at these wavelengths—unlike ordinary glass tubes that fog up after a few days.
**3. Details That Show Real Expertise**
The messiest part of building a liquid treatment rig is cable management. This unit routes **both the power cord and cooling air hose through the same end (single-ended)**. That's a huge win for sealing it inside a closed reactor or flow-through system. No more drilling random holes in the back of your equipment—better sealing, and no worry about splashes hitting the wiring. The lamp tube is 400mm long, with a 600mm installed length and a 65mm sleeve diameter. It's a comfortable size, whether you're dropping it into a flask or mounting it in a flow tube.
If you're holding back because of voltage limitations, or you find traditional 3kW ballasts too clunky, this setup is genuinely a **great budget-friendly alternative for small-scale pilot runs and teaching demos**. With this, high-power UV is no longer exclusive to factory floors.
∷
vigce
vigce
vigce